Why hasn't my Critical Power changed?
Why your Critical Power (CP) hasn't changed, or changed unexpectedly, and how athletes and coaches can fix it.
For: Coaches · Athletes Apps: Web, iOS, Android Sports: Cycling, Running
How Vekta estimates and updates your CP
Vekta doesn't take your CP from a single test. It models your whole power-duration curve, so CP, W′ and Peak Power are estimated together from the efforts you record.
What it uses: your best efforts across a range of durations and at different levels of fatigue over the past eight weeks.
When it updates: CP is recalculated after every new session, so a maximal effort can update it straight away. Your Vekta zones follow your CP.
Why one effort may not move it: the model combines several efforts over time. A single new best, especially a short one, often changes W′ more than CP.
Older efforts: past peak performances gradually carry less weight, so CP can drift down when you stop producing maximal efforts.
Where to see it: on the Athlete Profile. In the web app, open it from the top-right corner; in the mobile app, open the profile tab. The percentage on each metric card is the Change vs. your baseline 8 weeks ago.
Learn more about the science in Critical Power (CP) and W′.
CP didn't rise after a test or ramp test
A test only changes CP if Vekta has the file and the efforts were maximal. Work through these checks in order.
Check the test is in Vekta
A lab test, or a ride that never synced, doesn't count. If the ride isn't in your Calendar, upload its FIT file. Learn how in Import your training history.
Check the efforts were maximal
The model can only use what it receives. A 12-minute effort held at a prescribed intensity, rather than all-out, won't raise CP, and neither will a test that falls below a stronger effort you already did in the past eight weeks.
Prefer a CP test to a ramp test
Ramp and step tests give one threshold point, while CP and W′ come from the shape of your whole curve. Vekta recommends a maximal 3-minute and 12-minute effort. Follow the classic CP test protocol.
Report the test
Right after a test, report the activity from its options menu and say it was a CP test. The team then recalibrates your metrics using that test. Learn how to report an activity.
Or set your own value
If you trust your test result, you can enter it yourself. See the “Set your own CP value” section, Set your own CP value.
CP went down, or won't go down
CP follows your recent maximal efforts, in both directions.
CP went down: usually there have been no recent maximal efforts over longer durations, for example during a base period. Without them the model can settle on a lower CP and give more weight to W′. A maximal longer effort, such as the 12-minute effort of a CP test, gives it a clear reference again.
CP won't go down: a very strong effort in the past eight weeks keeps CP up until it carries less weight. If that effort looks too high for you, your power meter may have been over-reading. See the “A ride that wasn't yours, or bad power data, inflated your CP” section, about bad power data.
Your test came out lower: the model updates automatically after the session. If CP still looks too high, report the test activity so the team can recalibrate it, or set your own value.
A ride that wasn't yours, or bad power data, inflated your CP
One wrong file can set a peak that keeps CP high for weeks, so remove it from the model.
Find the ride
In an activity, the record profile chart shows your records. For All-time and Last 365 days, hover the chart to see the date each record was set, and open that activity from the table.
Delete a ride that isn't yours
Right-click the activity in your Calendar, or open its options, and delete it.
Report bad power data
If the ride is yours but the power looks wrong, for example a spike or a power meter reading high, report the activity and describe the problem. The team can exclude those efforts and recalibrate your metrics.
Ask for a recalibration
If your CP still reflects the deleted ride, contact support and ask for your metrics to be recalibrated.
You don't have a CP yet
Vekta needs enough power data before it can model your curve.
Cycling: CP, W′ and your power profile appear once you have about 30 rides with power data. Until then there are no Vekta power zones, and workouts with %CP targets can't be converted to watts or sent to Zwift.
You uploaded your history yourself: after a large manual import, contact support so the team can process your full history.
You have 30 or more rides with power and still no CP: contact support.
In the meantime: you can enter your own CP with Enter manual value (see the “Set your own CP value” section, Set your own CP value).
Running: CP and critical speed are calculated automatically from your runs, and W′ and D′ show on the Running tab of the Athlete Profile. If older runs don't show these values, contact support to have your running history reprocessed.
Swimming: there is no automatic CP. Enter your critical pace and Max Heart Rate manually to get swimming zones.
CP went up but W′ went down (or the other way)
This is normal in Critical Power modelling. The model shares your capacity between CP (aerobic) and W′ (anaerobic), so when one rises the other often falls.
A big sustained effort: CP can jump while W′ drops, because more of your performance is explained by aerobic capacity.
No recent long efforts: CP can drift down while W′ rises.
A new short best: a maximal 1-minute effort may raise W′ a little without changing CP.
The percentages: each metric card compares today's value with your baseline 8 weeks ago, so a large swing in one metric can come from a single strong session.
Your VO2max is estimated from your CP and W′, so it changes when they do.
Custom zones or %CP targets don't match your test
Custom zones change your zone boundaries only. They don't change your CP.
Sessions prescribed in %CP: keep using your CP, so editing custom zones won't change their targets.
To change those targets: change CP itself with Enter manual value (see the “Set your own CP value” section, Set your own CP value), or ask support to recalibrate it.
To set custom zones: use the Custom button in the zones section. Learn more in Training Zones.
Your FTP from another app is different
FTP and CP are calculated differently, so they aren't expected to match.
FTP: a single threshold estimate, usually from one test such as a ramp or 20-minute test.
CP: part of a model of your whole power-duration curve, built with W′ and Peak Power from many efforts. Threshold isn't the only driver.
If you trust your test: enter it as your CP with Enter manual value, or do a CP test so Vekta can model it. Avoid copying zones from another app into Vekta, as they are based on a different number.
Indoor and outdoor rides
Vekta uses the same CP and the same zones for indoor and outdoor rides, to keep things simple.
Many riders hold less power indoors. If your best efforts come from outdoor rides and indoor sessions feel too hard, lower the FTP in your indoor app slightly, for example by around 5%. If you ride mostly indoors, use your Vekta CP as it is.
Zwift workouts feel too hard or too easy
Zwift sets workout targets as a percentage of the FTP stored in your Zwift profile, and Vekta no longer sends your CP to Zwift. If the two values differ, your sessions will be too hard or too easy.
Check your CP
Open your Athlete Profile and note your cycling Critical Power.
Update your Zwift FTP
Enter the same value as your FTP in Zwift. Check it again whenever your CP changes.
The same applies to other apps that use a threshold value, such as MyWhoosh. Learn more about sending sessions to Zwift.
Set your own CP value
Vekta estimates your CP automatically. If you have a lab or field test result you trust, you can replace the estimate with your own value, and Vekta then uses your value. Athletes can do this on their own profile, and coaches can do it on their athletes' profiles.
Open the Athlete Profile
In the web app, go to the Athlete Profile (a coach opens the athlete's profile) and select the Cycling or Running tab.
Hover over Critical Power
Select Enter manual value. Vekta's current estimate is shown for comparison.
Save your value
Type your CP and select Use manual value. Vekta's estimate stays visible next to it.
Edit it later
Hover over the metric again and select Edit manual value, then Save changes.
Switch back to Vekta's estimate
Hover over the metric, select Edit manual value, then Use Vekta estimate. Do this when you want CP to follow your rides again.
When to contact support
Some fixes are done by the team, such as recalibrating the model from a test or excluding bad data. Contact support if:
your CP hasn't changed in months even though you've done new maximal efforts
you have about 30 rides with power and still no CP
your CP still reflects a ride you deleted
you imported your history yourself, or your older runs show no running CP
To get a quick answer, include:
The activity date: for the test, the wrong ride, or the effort that looks too high.
Your test values: for example your 3-minute and 12-minute average power, and where the test was done.
Your power meter: whether it was calibrated, and any reason to think it read high or low.
For coaches: which athlete it concerns.
You can also report the activity directly from its options menu. Learn how to report an activity.
Frequently asked questions
If I do a CP test, will Vekta update my CP automatically?
Yes. CP is recalculated after every session. For the most accurate result, report the test activity right after so the team can recalibrate the model from it.
If my test result is lower than my current CP, will it go down?
The model updates automatically, but a stronger effort from the past eight weeks can keep CP higher. Report the test or set your own value with Enter manual value.
Can I set my CP myself?
Yes. On the Athlete Profile in the web app, hover over Critical Power and select Enter manual value. Switch back at any time with Use Vekta estimate.
How many rides do I need before I get a CP?
About 30 rides with power data. If you have that many and still see no CP, contact support.
Does Vekta use a different CP for indoor rides?
No. Indoor and outdoor rides share the same CP and zones.
Why hasn't my VO2max changed?
VO2max is estimated from a 5-minute power calculated from your CP and W′, not from your best recorded 5 minutes. It changes when they do.
Where can I see my W′?
On the Athlete Profile, next to your Critical Power, in both the web and mobile apps.
